Sliding Patio Doors Repair
Patio doors that slide open are an excellent way to take advantage of your outdoor space, however they can become difficult to open and close. This can be due to a variety of problems like dirty tracks or a misaligned slider.
Start by cleaning and lubricating your rollers. You can also use the adjustment holes on the bottom of the panel to adjust the alignment of your rollers.
Tracks that are damaged or dirty
A sliding door that does not slide properly can be due to an unclean or damaged track. Over time, dirt, grit, and even rust could build up, preventing the track to move smoothly. The solution is to clean the track thoroughly using an abrasive and mild detergent. It is recommended to complete this task frequently to ensure the smooth operation of your door and prevent the need for costly repairs down the road.
A leaking door can also be a common issue. It requires immediate attention in order to stop structural damage, water damage and the growth of mold. The most common cause is worn weather stripping and doors that are not aligned properly, which can be corrected by replacing the weather stripping and aligning the door.
Another issue that can be fixed with a little DIY work is the problem of rollers that veer off the track. Find a friend to assist you with this task because the door may be heavy. Stand inside the house, and lean the panel in front of you to reposition the rollers. Once the panel is lifted off the bottom track, you'll need to place it on sawhorses in order to prevent it from falling off. Then, loosen each of the roller's screws and then pry them out with the help of a screwdriver. It is now possible to remove any dirt that's stuck between the wheels and the tracks. You can then clean each wheel with denatured alcohol and the rag, then move the wheels and reattach them to their tracks.
double glazed patio door repairs is possible to straighten a bent section of track using a mallet made of rubber and a block of wood. However, if the bent section is located near the hinges and is likely to cause further damage, you'll better off calling in a professional for safety reasons.
Rollers that are not aligned
If your sliding door isn't moving as it should it's because the roller wheels aren't aligned with the track. The wheels may be rusted or dirty, and their bearings are worn down. This creates friction between the bottom of the door and the track, which causes it to grind or snag when it's opened or closed. It also makes sounds that squeak.
Fortunately it's a simple fix. It is not necessary to take off the door to get at the wheels since they are mounted on a bracket which is adjustable. Find the holes for adjustment (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. Turning the screw clockwise will raise the wheel, whereas turning it counterclockwise will lower it. Continue adjusting until the door moves smoothly and quietly when open or closed.
It is essential to adjust the wheels prior adjusting the latch. In order for the lock to function properly, the latch hooks must be aligned with the strike plate. If you don't take this step, the latch may accidentally open or shut even when you're not in the room.
Sliding patio doors are an investment, and keeping them working properly will keep your family safe and secure. You can avoid future expensive repairs by addressing problems that are common, like broken rollers, tracks and handles. Contact us to learn more about patio doors. We can evaluate your needs for repair of your sliding patio door and assist you in keeping it in good condition. Our experts are also able to assist with any replacement parts that you might require.
Damaged or loosely held door frame
Doors for sliding patios are an excellent option for any home. They offer a convenient and attractive alternative to swing-open or hinged doors for patios. Like any other hardware item, sliding patio doors can develop problems over time. A lot of these issues are fixable with a little DIY skills.
A common issue with sliding patio doors is gaps in the frame. It can be caused by many factors, including tracks or rollers that are not aligned properly as well as a damaged or damaged door track or bent door frame. In most cases the root of the issue can be resolved by removal of the door and reconnecting the track or rolling elements. This must be done with caution to avoid cause damage to the track or frame.
In some cases it may be necessary for the entire track to be replaced. This can be accomplished easily with a universal kit, which is available in all major hardware stores. These kits are easy to install and will have your door functioning properly again in no-time.
Regularly inspect your sliding door's hardware and frame for signs of wear, for example loose screws or bolts. This is an easy and efficient DIY patio maintenance procedure that can be accomplished with the help of a screwdriver. Additionally, it is important to lubricate your tracks and rollers to ensure smooth operation and to prevent premature wear.
Patio doors are usually the primary entrance to the backyard and outdoor living space for a majority of homeowners. Therefore, they have to be able to function properly in order to ensure the safety of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and cut down on costly repairs or replacements.
Faulty Handle
The sliding patio doors are ideal for allowing you to get into your home and access your backyard, however they can become difficult to operate if they are not aligned properly. A defective handle could cause the door to become stuck or difficult to open and close. The good part is that repairing a loose handle is a fairly simple job that can be accomplished at home.
In many cases, a loose grip is a result of screws that have slipped out of the backplate. To fix this issue, simply tighten the two screws that are on the inside of the handle with a screwdriver. If you find that the handle is still loose, it may be an indication that the threads have damaged and must be replaced.
Or, a damaged latch could be the cause. It is more likely the latch will break if it is made of metal instead of plastic. Try applying lubrication to the latch in case it isn't turning or catching. If this does not work, you may have to replace the lock.
If the handle is damaged or broken, it can be difficult to use. If this happens, you will have to replace the handle with one that is in line with the style and design of your patio doors.
Feldco can help you restore your patio doors to their former splendor, no matter if they are brand new or old and outdated. We offer high-quality doors in various sizes and styles that can be adapted to match your home perfectly. For more information about our doors, contact us today! We provide homeowners with our services throughout Southern California, including Ventura County, Orange County & San Diego County.
Faulty Weatherstripping
It's time to replace your weather stripping if you notice light coming from windows and doors, or sense a draft pulsing towards the door or window. The strips form a tight seal that keeps unwanted air, pests, and water from getting into your home. It also keeps your heated and conditioned air in, saving you money on your energy bills all year long.
It may have lost its strong seal, bouncy, due to aging. It is easy to identify this by putting a dollar bill under the seal on the top and bottom of the jamb as well as door frame where they overlap. If the dollar bill slides between the seal and door with ease then it's time to replace the weatherstripping.
If you only replace the worn-out section of weather stripping, this could cause problems in the future with the seal. It is much more effective to replace all the stripping. This will let you rest sure that your door will be sealed properly.
To make a DIY project that is simple take a look at our guide on weather stripping to remove old weather stripping and then apply the right material to your sliding patio door and frame for a lasting and secure seal. This is a great way to save money on your energy bills and also fix your sliding patio door. Don't wait until it's too late. You'll be able to save money and improve the appearance of your home.